-
Geasure Medical
-
1
-
ISO 13485 \ CE \ FDA 510(k) Cleared \ Free Sale Certificate\ MDSAP
-
CoCrMo
-
Custom service supported
-
7–14 Days (OEM: 15–30 Days)
-
Ethylene oxide sterilization
CR Femoral Condyle Introduction
The Geasure CR Femoral Condyle is the cruciate-retaining femoral component listed for Active High Flexion TKA System III. It is offered in left and right configurations across six sizes, from 4L/4R to 14L/14R, with ML and AP dimensions specified in the product catalog. It is intended to be selected as part of the corresponding System III configuration.
CR Femoral Condyle Key Features
CR configuration: Identified in the catalog as the CR femoral-condyle option in Active High Flexion TKA System III. The catalog also lists a PS option in the same system.
Left and right options: Available in both L and R configurations, allowing buyers to distinguish side-specific product numbers.
Six listed sizes: Sizes run from 4 to 14 in even-numbered increments.
ML and AP dimensions provided: The catalog specifies both dimensions for each size to support product comparison and procurement review.
System-level component options: System III lists matching III-type tibial trays and CR, CRDF, and III-type polyethylene inserts. Confirm the exact pairing from current technical documentation before ordering.
High-flexion system positioning: The product catalog presents System III as a high-flexion TKA system. It does not establish a clinical outcome or a specific flexion result for this CR component.
CR Femoral Condyle Specifications
Product No. | Model / Size | ML (mm) | AP (mm) | Material |
|---|---|---|---|---|
B770101 | 4L | 58 | 50 | CoCrMo |
B770102 | 6L | 62 | 55 | |
B770103 | 8L | 66 | 59 | |
B770104 | 10L | 70 | 62 | |
B770105 | 12L | 73 | 66 | |
B770111 | 14L | 76 | 70 | |
B770106 | 4R | 58 | 50 | |
B770107 | 6R | 62 | 55 | |
B770108 | 8R | 66 | 59 | |
B770109 | 10R | 70 | 62 | |
B770110 | 12R | 73 | 66 | |
B770112 | 14R | 76 | 70 |
The source labels the dimensions ML and AP; the table preserves those labels without assigning further definitions.
Compatible Components and Instruments
The 2026 joint product catalog lists the following components in Active High Flexion TKA System III:
Component | Catalog reference | Procurement note |
|---|---|---|
III-type tibial tray | B7201 series | Verify size pairing against the current system chart. |
CR polyethylene insert | B7801/B7802 series | Available in three sizes and thicknesses: 9 mm, 11 mm, and 13 mm. |
CRDF polyethylene insert | B8001/B8002 series | Available in three sizes and thicknesses: 9 mm, 11 mm, and 13 mm. |
III-type polyethylene insert | B7301/B7302 series | Available in three sizes and thicknesses: 9 mm, 11 mm, and 13 mm. |
Bone cement stem | B7401/B7601 series | The specification is 9*90; the dimensions are 10 mm in diameter and either 40 mm or 55 mm in length. Please confirm the intended configuration. |
Tibial plateau screw | B750101 / B600401 | The listed specification is |
The catalog does not identify the instruments required for this CR femoral condyle. No cross-brand interchangeability is established by the available information.
Manufacturer Strengths
Geasure Medical’s current website describes the company as an orthopedic implant and surgical instrument manufacturer, lists Joint Prostheses as a product line, and states that the company supports OEM/ODM cooperation and operates under an ISO 13485 quality system. These are company-level statements, not confirmation of this component’s material, regulatory status, or product-specific certification. (orthogeasure.com)
Distributor and OEM/ODM Cooperation
Distributors, importers, and brand owners can submit the required CR size and product number, intended system configuration, estimated order quantity, target market, and any registration-document requirements. For OEM/ODM enquiries, include the requested changes and applicable technical or regulatory specifications so Geasure can assess the project scope. Product-specific customization availability and regulatory documentation should be confirmed during technical review.
CR Femoral Condyle FAQ
What is the CR femoral condyle?
It is the CR femoral component listed in Geasure’s Active High Flexion TKA System III. The catalog also lists a PS femoral component option for System III.
What sizes are available?
The catalog lists sizes 4, 6, 8, 10, 12, and 14 for both left (L) and right (R) configurations. Product numbers and ML/AP dimensions are shown in the specification table.
What material and surface finish does it use?
The reviewed product catalog does not specify the material or surface finish for the B7701 CR femoral condyle. Request the current controlled technical specification before adding these details to purchasing documents.
Which components are listed with this femoral condyle?
The catalog lists the System III tibial tray and CR, CRDF, and III-type polyethylene inserts, as well as bone cement stems and tibial plateau screws. Confirm exact size combinations using the current compatibility chart.
Are dedicated surgical instruments specified?
Dedicated instruments for this component are not identified in the reviewed catalog pages. Request the current instrument list and confirm that it corresponds to the selected System III configuration.
Can Geasure provide certification or registration documents for this product?
The documents required and the product’s market status must be checked for the specific product and target country. Company-level certificates do not by themselves establish that this femoral condyle has a particular clearance or registration.
What information should distributors include in an enquiry?
Provide the product number and size, left/right configuration, intended System III component pairing, estimated quantity, target market, required regulatory documents, and any OEM/ODM request. This helps the team assess the enquiry against the relevant technical and regulatory requirements.
